When you have connected a new camera to your router, you need to open its web interface – just type in the local IP address of your new camera in a web browser – you can find this local IP address (usually in format 192.168.x.x) in your router among other connected devices.

When you have just opened the camera’s web interface, you need to activate it first by setting up a password:

In the camera’s web interface navigate to Setup > Basic > Video Profile. One this page you need to change the first profile’s codec from MJPEG to H.264:

We would also recommend setting the following Video profile settings:

• Resolution 1920×1080
• Frame Rate 30fps
• Max Bitrate 2048

Save changes and navigate to Basic > IP & Port > Port and make sure that the camera is using default HTTP (80) and RTSP (554) ports:

Now you need to setup port forwarding on your router – you can find the step-by-step guide for your router on this website. Create forwarding rules for HTTP (80) and RTSP (554) ports:

Login into your Cloud Account (Here)and add a new camera: 

Set the stream parameters – your routers public IP address, HTTP & RTSP ports that you have selected on step 5, camera’s username and password: